Home Page
Back

 




INSTALLATION OF THE DIVING CONCEPTS SNAP-ONTM DRYGLOVE KIT NEOPRENE WRIST SEALS

Do you want to install the dry glove system with or without an inner latex seal? 

I would like to install the Diving Concepts Snap-OnTM Dryglove kit without an inner latex seal

I would like to install the Diving Concepts  Snap-OnTM Dryglove kit with an inner latex seal
  • When diving without an inner latex seal, air can flow into your hand from your drysuit and warm your hands. Also, you will not feel strong hand squeeze at depth (e.g. > 100 feet). However, if you puncture your dryglove, water can neter your drysuit. 
  • When diving with an inner latex seal if you puncture our glove water will not pass beyond your latex seal and into your drysuit. However, you will feel glove squeeze with depth and below 100 feet the glove squeeze may become uncomfortable. Some divers have placed non-collapsible rubber tubing or partially cut plastic pens in between the seal and their wrists. this can allow airflow and can be slid inside the suit in the event of glove puncture. 

Neoprene wrist seals have memory and once they are stretched over the suit connector they will not return to their original size and you will not be able to use them as a wrist seal unless they are altered or replaced.


Company Info | Why Dive Dry | Catalog | Local Dealers
Contact Us | Home

©1999-2000 Diving Concepts Inc.